2023 Sure-Trac 7x20' Tube Top Utility Landscape Trailer 7000# GVW * 3x4" ANGLE FRAME * 2" TUBE TOP RAIL * 2X2" TUBE GATE C/M + SPRING ASSIST + FOLD FLAT * TOOLESS GATE REMOVAL * SPARE MOUNT * PROTECTED WIRING * SET BACK JACK * TRIPLE TUBE TONGUE

Watch a video walk around of this trailer here: https://youtu.be/Kr2p2MymgbE

FEATURES- 2 x 6 Pressure Treated Decking

• 2 x 2 Heavy Tube Top Rail for Structural Rigidity
• Fold Flat/Spring Assist Gate
• Self-Retained Gate Pins
• Tube Uprights
• 15" Radial Tires
• All Steel Fenders with Backers
• Wiring Enclosed in Tubular Steel
• Board Retainers Front and Rear
• Zinc Set Back Jack
• EZ Lube Hubs
• Rubber Mounted LED Sealed Lights
• Spare Tire Mount
• Tandem Axle BrakesTHE SURE-TRAC DIFFERENCE

• Fold Flat Ramp Gate - Gate folds flat down inside trailer bed to reduce wind resistance and improve ride quality. Many gates are not designed with this feature.
• Spring Assist Ramp Gate - Although a very heavy duty gate, the gate is perfectly balanced and has virtually no weight to it. By folding it inside the trailer, you remove the tension and allow the gate to be easily removed.
• Self Retained Gate Pins - While the gate pin system seems seemingly unimportant, you can't appreciate this until you've had a poorly designed pin setup. Nothing to lose, nothing to break. Simple yet secure.
• Zinc Set Back Jack - More corrosion resistant than most, and also in a set back position to reduce the chance of impact with your tail gate. Many still use a standard painted A-frame jack that is in the way.
• Sealed LED Lights - Brighter, longer lasting, and they have less draw. Now with the new bullet style. Some competitors are still using stud mount incandescent lights.
• Protected Wiring - Unlike many trailers that literally either have the wiring stapled to the underside of the bed, or ran through a torched hole, the wiring is ran in conduit and gel filled.
• EZ Lube Hubs - This standard feature makes servicing your bearings a breeze for any homeowner armed with a grease gun and a few hand tools.
• 15" Radial Tires - Longer lasting and better riding, radial tires should be on all trailers, but sadly many still use bias...beware of the "hybrid" tire, which looks like a radial, but is still a bias tire at heart.
• Self adjusting brakes - We equip all of our tandem axles with brakes on both axles. The brakes are self or forward adjusting, much like a vehicle, and automatically adjust to the proper clearance via spring tension.
• Front and Rear Board Retainers - While the original owner isn't likely to be the one to replace the deck boards, Sure Trac makes it a breeze to do so. While many simply weld the front/rear in place, Sure-Trac uses a "retainer" that, by simply removing a handful of decking screws, allows the boards to easily and very simply be removed/replaced.
• Spare Tire Mount - While many don't include a mount or have an uninspiring design, Sure-Trac's does an excellent job integrating the mount into the structure without obstruction.
• Tube Gate Crossmembers - The gate on all utilities are built from 2" x 2" tube cross members. Unlike many trailers that use angle, the gate isn't a bottleneck on this trailer. For the most part, if it's within the legal payload of the trailer, the gate will handle it with ease.
• Tread Plate Teardrop Fenders - Most are equipped with smooth fenders, which are lighter duty and just don't look quite as robust. On tandems, the teardrop style also gives more strength than the cheaper straight fender of found on cheaper models.
• Gussets on Fenders - All trailers 6'+ get fender gussets, which gives additional strength to a fender impact, and protection to the light and wiring. Also functional as a side step up into the trailer!
• Triple Tube Tongue - Much more support and stability than the inferior trailers offering only a single tube or an A-frame tongue. If you ever load tongue heavy, this is the trailer for you.
• Channel Full Wrap Tongue - All tongue's are made from structural channel, and all tandem's and ATV ramp models have a full wrap tongue. Many cheaper utilities don't offer a full wrap, which offers little support between the front of fender to the front of the trailer. Also, some use a lighter angle iron tongue or a non-structural formed tongue.
• Silicone Joints - Sure Trac protects the various seams of the trailer from the elements, such as between the tongue and mainframe, fender and toprail, etc.
• EZ Gate Removal - The gate is heavy duty, but due to an excellent design, it can be removed fairly quickly, by one person, and requires no tools. Many gates require a second person to remove, as well as a socket.
• Tie Downs - Many utilities don't include standard tie-downs, but with Sure Trac most models include either stake pockets or D-rings, and there is also the bottom of the tube uprights.
• Powdercoat Tough - Our trailers have one of the toughest finishes on the market, in large part due to the steel prep prior to final finish. One of the best finishes on the market, particularly at the price point.
• Painted Underside - Hard to believe, but if you've crawled under many utilities, you'll quickly find that paint on the underside of some trailers is an option...makes you wonder where else shortcuts are being made.
• Stronger Top Rail - With tube top rails, uprights, and mitered corners, our utilities have one of the toughest top rails, and looks robust.Better Paint, Better Wiring, Better Welds, Better Features, Better Design...Better get one.www.sure-trac.com

**