2021 Norstar SR Flatbed Truck Bed 8'6x97"x56"CTA * SR086975600I37BK

8'6x97"x56"CTA * SR086975600I37BK

**Stock photos of the SR Bed May be Shown with Options.



Watch a short video here: https://youtu.be/2zEFTz4z7WU

Diamond Plate Flat Bed

One of our best sellers - and for good reason. The Norstar SR model offers everything you need in a flatbed configuration. The standard 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Durable diamond plate construction and powder coat will make this bed your most faithful assistant for years to come. Tapered corners, 7 way plug with 4 way adapter and recessed 2 5/16" ball and receiver hitch give you a towing package standard. Exposed stake pockets and rub rail ensure you have tie down points for any load and LED lights are standard on all SRs. Full 11 gauge skirted rear bumpers finish off every model as an additional standard feature. If you want a little more from this basic configuration, look over our options list. We have underbody locking tool boxes for additional storage and gooseneck troughs for a towing upgrade, spare tire mounts for the unexpected and a list of other options to personalize your bed for your home or business needs.

Structural Steel Frame

2" 18.5k Rated Bumper Receiver

30k Rated 2 5/16" Gooseneck Ball

4" Runner Channels (Adjustable on 84", 8'6" Only)

Formed 3 x 3/16" Channel Cross Members

Steel Tube Head Rack with Cross Bars, Tail and Reverse Lights

Steel 1/8" Diamond Plate Floor

Built-In Gooseneck Well with Ball Mounted and Diamond Plate Lid

Angled Fuel Filler Neck and DEF Ready

Skirted Rear Bumper

1/8" Diamond Plate Construction

Receiver Hitch Ready

7 Way Plug in Gooseneck Box

Powder Coated Black

2.5" LED Reflective Marker Lights

4 Clear 6" Oval LED Reverse Lights

6 Red 6" Oval LED ST/TL/TN Lights

Single LED License Plate Light

All Lighting DOT Approved

Molded Sealed Harness with Resistors

4/5 & 7 Way Receiver Female Plug with ADAPTER

11 Ga Bumper

Adjustable Mudflap Brackets

FITMENT:

Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.- Length: Measurement from cab to end of frame.

• Width: Measurement from outside of tire to outside of tire
• CTA: Measurement from cab to axle
• Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
• Models: ST, SF, SR, SD
• Order Method: Model x Length x Width x CTA x Runner
• Example: ST 9'4"L x 97"W x 60"CTA x 34" Runners (Add options) Note: 11' long beds will have 84" CTA

Ford:

1998-Present - Dually -- 8'6"L x 97"W x 56" CTA x 38" Runners- Single Wheel Long Wheel Base -- 8'6"L x 84"W x 56"CTA x 38" Runner- Single Wheel Short Wheel Base -- 84"L x 84"W x 40"CTA x 38" Runner- Cab & Chassis -- 9'4"L x 92"W x 60"CTA x 34" Runners- F-350 takes a 92"W- F-450 & 550 are 94" & 97"W with Standard Headache Rack- 2015 F650 Runners 34.5"

GM / Chevrolet:

2001-Present - Dually -- 8'6"L x 97"W x 56"CTA x 42" Runners- Single Wheel Long Wheel Base -- 8'6"L x 84"W x 56"CTA x 42" Runner- Single Wheel Short Wheel Base -- 84"L x 84"W x 42"CTA x 42" Runner- Cab & Chassis -- 9' 4"L x 90" or 92"W x 60"CTA x 34" Runners- (Prior to 2000 measurements will be required)- 4500 & 5500 is 94"W with 60" Headache Rack

Dodge:

2003-Present - 2007 Cab and Chassis -- 9'4"L x 94"W x 60"CTA x 34" Runner- Mega Cab -- 84"L x 97"W x 40" CTA x 42" Runners- Mega Cab -- 84"L x 84"W x 38" CTA x 42" Runners- Dually -- 8'6"L x 97"W x 58"CTA x 42" Runners- Single Wheel Long Wheel Base -- 8'6"L x 84"W x 58"CTA x 42" Runner- Single Wheel Short Wheel Base -- 84"L x 84"W x 38"CTA x 42" Runner- 2002 and earlier will have 56" CTA and 38" Runners on long bed