2021 Ironbull 102x32' Gooseneck Deckover Hydraulic Dovetail Trailer 24000# GVW * DEXTER 12K AXLES * EOH DISC BRAKES * BLACKWOOD TAIL * I-BEAM FRAME * TORQUE TUBE * UNDER FRAME BRIDGE * RUBRAIL/STAKE POCKETS/PIPE SPOOLS/D-RINGS * DUAL JACKS

UNIT HAS UPGRADED DEXTER 12000# AXLES, ELECTRIC OVER HYDRAULIC DISC BRAKES, BLACKWOOD DOVETAIL (RUBBER INFUSED LUMBER = IMPROVED TRACTION), AND A SPARE TIRE.

Iron Bull has put a new twist on a classic dove tail design. Our improved patented design offers an upgrade to users that need a no nonsense design and the strength of a Bull. Our dual cylinder mechanism provides unmatched lifting power and our revolutionary full tension lock up system provides a rock solid foundation while towing. An industry best max lifting capacity of 12k lbs properly loaded and max hauling capacity of 8k provides an unmatched performer. This design auto locks so there is no need to manually engage and disengage a separate device when lowering and raising the tail - perfect for wireless remote applications. When in action, the dual arms approach the ground as the tail lowers and provide extra rear stability when loading heavy equipment. Iron Bull Goosenecks are some of the most rugged and longest lasting units in service today. Decades of experience in our new manufacturing company have combined to create one of the most thought out trailers available. Included on each Iron Bull trailer is a pipe bridge to reduce torque under heavy loads. This pipe is not an option, but standard on every trailer and the heavy SCH40 construction outclasses thin walled pipe as seen on some of the competition. Low-Pro, pierced frame design lowers the deck 3" providing a lower center of gravity, more stable cornering and a lower loading angle for equipment. 12" 19lb/ft I-Beam makes up the main frame of these monsters - compared to the 14lb found on the other guys. Heavy duty 10" I-beam crossmembers are located on the lower main frame to further support the pipe bridge. These important steel beams are omitted by some competitors. 3" Channel crossmembers located in the deck frame are on 16" centers and topped with 2" x 6" treated pine wood and you will find a standard locking toolbox at the front of each gooseneck trailer. Two oversize 16" side steps adorn the front of each deck to provide stable footing. All wiring is in a sealed harness and runs inside the 2" x 6" upper deck frame. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with stake pockets, pipe spools and rub rails as well as an adjustable coupler. All Iron Bulls are sitting on Dexter Nev-R-Adjust brake axles and roll down the road on radial tires. All Iron Bull trailers are covered by the impressive Ironclad 2-3-2 warranty program (2 years structural, 3 year comprehensive, 2 year roadside), see below.





Watch a video walk around of this model trailer: https://youtu.be/4b77pmIDcww

12" I-Beam Frame and Neck (19 lbs/ft)

2 5/16" Adjustable Coupler

3" Structural Crossmembers, 16" O.C.

Rub Rail, Stake Pockets & Pipe Spools

4 Standard 3" D-Rings

Cambered Dexter Nevr-R-Adjust Spring Axles

Multi-leaf Slipper Spring Suspension

E-Z Lube Hubs

Electric Brake Axles

Standard Torque Tube & Pipe Bridge

2 - 12K Drop-Leg Jacks

Treated Pine 2" x 6" Floor

235/80R16 Radial Tires with 8 Hole Wheel

Lifetime LED Lighting

All Lighting DOT Approved

Molded Sealed Harness with Resistors

7-Way Receiver Female Plug with Adapter

Powdura Powder Coat

Each Iron Bull trailer is covered for a period of two years from the date of purchase with a free roadside assistance package. Benefits include:

• Flat Tire Changes
• Towing and Road Service for both the trailer and tow vehicle
• Jump Starting
• Fluid Delivery (including fuel, hydraulic, coolant, etc...)
• Lock Out Service
• On the road and off road coverage
• Consumer and commercial coverage
• All benefits extend to the tow vehicle
• Included free on every Iron Bull Trailer